Fax Settings - Xerox DocuPrint C2090 FS Quick Reference Manual

Fax settings

You can specify the settings for Dial
type, Ring pattern, Line monitor,
Redial attempt, Fax footer, Junk
block and Call diag under this menu.
To specify the setting for Dial type,
do the following:
1. In Fax mode, use the < / >
buttons to select [Configuration
FAX] function.
2. Press <Set> and the LCD shows
[FAX Config -Dial type].
3. Use the < / > buttons to select
[Tone] or [Pulse].
4. Press <Set> to confirm.
To specify the setting for Ring pat-
tern, do the following:
1. In Fax mode, use the < / >
buttons to select [Configuration
FAX] function.
2. Press <Set> and the LCD shows
[FAX Config -Dial type].
3. Use the < / > buttons to select
[Fax Config - Ring Pattern].
4. Use the < / > buttons to select
[Normal] or [Distinctive].
5. Press <Set> to confirm.
To specify the setting for Line moni-
tor, do the following:
1. In Fax mode, use the [ / ] but-
tons to select [Configuration
FAX] function.
2. Press <Set> and the LCD shows
[FAX Config -Dial type].
3. Use the < / > buttons to select
[Fax Config - Line Monitor].
4. Use the < / > buttons to adjust
the value from 0 to 3
5. Press <Set> to confirm.
To specify the setting for Redial
attempt, do the following:
1. In Fax mode, use the < / >
buttons to select [Configuration
FAX] function.
2. Press <Set> and the LCD shows
[FAX Config -Dial type].
3. Use the < / > buttons to select
[Fax Config - Redial attempt].
4. Use the < / > buttons to adjust
the value from 0 to 9.
5. Press <Set> to confirm.
To specify the setting for FAX Footer,
do the following:
1. In Fax mode, use the < / >
buttons to select [Configuration
FAX] function.
2. Press <Set> and the LCD shows
[FAX Config -Dial type].
3. Use the < / > buttons to select
[Fax Config - Fax Footer].
4. Use the < / > buttons to turn
the Fax footer on/off.
5. Press <Set> to confirm.
Sending a fax
- 48