Sending A Fax; Placing The Originals - Xerox DocuPrint C2090 FS Quick Reference Manual

Sending a fax

This chapter explains how to send
fax copies and customize settings for
fax tasks.

Placing the originals

You can either place originals on
either the Auto Document Feeder
(ADF) or on the platen glass.
Before sending a fax, make sure the
transportation lock on the back of the
B is set to the unlock position.
Always keep the platen glass clean
to prevent dirty or blurry images.
Notes:
• Do not place heavy objects on the
platen glass or press it with too
much force.
• If you intend to fax documents
with multiple sheet, using the ADF
is recommended.
To place the original on the platen
glass, do the following:
1. Open the document cover and
place the original face-down on
the platen glass as shown. Use
the paper size marks on the left
side of the platen glass to posi-
tion a document.
2. Close the document cover gently
so that your original does not
move.
To place the original on the Auto
Document Feeder (ADF), do the fol-
lowing:
1. Slide the guides all the way out-
ward.
2. Arrange your originals in order.
The first page to copy should be
on the top of the stack.
3. Insert the originals to be copied
face up in the ADF. Slide the
edge guides inward against the
edges of the originals.
Sending a fax
- 42