For Machine Operation - Xerox DocuPrint C2090 FS Quick Reference Manual

Xerox printers setup and quick reference guide
Table of Contents

Advertisement

For Machine Operation

Do not place any liquid container such as a vase or coffee
cup on the machine. Spilt water can cause fire or electric
shock.
Do not place any metal parts such as staples or clips on the
machine. If metal and flammable parts get into the machine,
they can short-circuit internal components, and cause fire or
electric shock.
If debris (metal or liquid) gets into the machine, switch off and
unplug the machine. Contact our Customer Support Center or
your dealers. Operating a debris-contaminated machine can
cause fire or electric shock.
Never open or remove machine covers that are secured with
screws unless specifically instructed in the manual. A high
voltage component can cause electric shock.
Do not try to alter the machine configuration, or modify any
parts. An unauthorized modification can cause smoke or fire.
Never touch a labeled area found on or near the heat roller. If
a sheet of paper is wrapped around the heat roller, do not
attempt to remove it by yourself. Doing so may cause injuries
or burns. Switch off the machine immediately and contact the
Customer Support Center or your nearest dealers for assis-
tance.
When removing jammed paper, make sure that no pieces of
torn paper are left in the machine. A piece of jammed paper
remaining in the machine can cause a fire. If a sheet of paper
is wrapped around the heat roller, or it is difficult to see the
jammed paper, do not try to remove it by yourself. Switch off
the machine immediately, and contact the Customer Support
Center or your nearest dealers for assistance.
vi - Preface
WARNING
CAUTION

Advertisement

Table of Contents
loading

Table of Contents