Getting Started; Placing The Docuprint C2090 Fs - Xerox DocuPrint C2090 FS Quick Reference Manual

Getting started

This chapter helps you get started
using the DocuPrint C2090 FS.
Placing the DocuPrint
C2090 FS
The DocuPrint C2090 FS should be
located at a well-ventilated place so
that the exhaust gases and heat gen-
erated are not directly blown onto the
user's face. Proper ventilation is
necessary to prevent the machine
from overheating.
a
b
c
d
Recommend Distance
a 910 mm
b 210 mm
c 830 mm
d 180 mm
e 300 mm
Important:
•
•
•
Note:
e
Ensure that the DocuPrint C2090
FS is installed at a location with the
following conditions:
Temperature range 10-32° C,
humidity range 15 - 85% (no con-
densation). Humidity should be
70% or below at 32° C, and tem-
perature should be 28° C or below
at 85% humidity.
Do not expose the machine to
direct sunlight.
Do not expose the machine to
direct draft from an air-conditioner
or heater.
When using the printer with the
bypass tray opened, do not expose
the printer to direct sunlight. Doing
so may cause a malfunction.
Getting started - 12