Resetting The Copy Settings; Restrictions On Copying - Xerox DocuPrint C2090 FS Quick Reference Manual

Resetting the copy settings

There are two ways to reset the copy
settings to default values. One is by
pressing and holding the <Clear All>
button on the control panel. This will
return the LCD screen to its initial
default display. Another way is by
pressing the <Clear> button on the
control panel. The number of copies
will be set to its default value 1.
Note:
Pressing and holding the <Clear
All> button resets settings for all
modes.

Restrictions on copying

Users of this machine must observe
the following restrictions to ensure
the responsible and legal use of this
machine. See "Regulatory notices "
on page i in Preface.
41 - Copying