Table of Contents
Advertisement
5. With the lever in the upright posi-
tion, hold the drum cartridge by
the handle, align the arrows on
the drum cartridge with the corre-
sponding arrows on the printer
and guide the cartridge in until it
snaps into place.
6. Pull down the lever on the right to
lock the drum cartridge in place.
Flip down the top cover, and then
close the front cover.
7. Slowly push down cover B to its
original position.
Notes:
•
Hold the drum cartridge by the
handle. Do not touch the surface
of the drum (blue colored part).
Also, never allow any material to
hit or rub the surface of the drum.
•
Do not expose the drum cartridge
to direct sunlight or strong light.
•
To ensure good print quality,
always keep the drum cartridge
level when handling it.
•
After installing the drum cartridge,
the printer makes an adjustment
for about one to two minutes. Do
not switch off the printer during
this time.
Installing extra memory
Memory expansion for 256 MB is
supported for this printer. When addi-
tional memory is installed, the total
memory capacity becomes 256 MB
respectively.
Important:
•
Do not touch the connectors of
the additional memory module.
•
Do not bend or damage the addi-
tional memory.
•
Be sure to touch a metal surface
to eliminate static electricity
before touching the additional
memory with your bare hands.
•
To add more memory when the
printer is in use, you need to con-
figure the memory capacity in the
print driver. For details, refer to
the Online Help for the print
driver.
1. Make sure the machine is turned
off when adding or removing the
SDRAM module.
2. Slowly flip up cover B, you will
find the cover of the memory slot.
p
Getting started - 18
Advertisement
Table of Contents
Troubleshooting
