Unusable Paper; Loading Paper - Xerox DocuPrint C2090 FS Quick Reference Manual

Unusable paper

The following types of paper might
cause paper jams, malfunctions or
damage to the device.
• Paper that is too thick or thin
• Paper that has been used for
printing
• Wrinkled, folded or torn paper
• Curled paper
• Wet paper
• Paper with static electricity
• Postcards with pictures
• Adhesive paper
• Treated color paper
• Paper with special coatings
• Thermal paper
• Carbon paper
• Paper with staples, paper clips,
ribbons or tape
• Paper with rough surfaces
such as pulp paper or fibrous
paper
• Transfer paper (cold water use)
• Paper exclusively for ink-jet
printer use.

Loading paper

This section explains how to load A4
size plain paper in the portrait orien-
tation with the paper tray.
Note:
• Load the paper into this printer
while the printer is switched on.
• For the paper type and size that
can be loaded into this printer,
refer to "Usable paper" on
page 62.
To load paper in paper tray:
1. Gently pull open Cover D.
2. Slide the width guides to the
edge of the tray. Squeeze the
length guide and slide it to the
desired paper size.
3. Load the paper with the side to
be printed facing up and with all
four corners aligned.
Paper handling
Paper feed
orientation
1
2
- 64