Peer-To-Peer (Docuprint P355 D Only) - Fuji Xerox DocuPrint P355 d User Manual

 Peer-to-Peer (DocuPrint P355 d Only)
If you use the peer-to-peer method, the print driver is fully installed on each client computer. Network clients retain
control of driver modifications. The client computer handles the print job processing.
• For Windows XP, Windows XP 64-bit Edition, Windows Server 2003,
and Windows Server 2003 64-bit Edition
1
Click start (Start for Windows Server 2003 / Windows Server 2003 64-bit Edition) → Printers and Faxes.
2
Click Add a printer (Add Printer for Windows Server 2003 / Windows Server 2003 64-bit Edition) to launch
the Add Printer Wizard.
3
Click Next.
4
Select A network printer, or a printer attached to another computer, and then click Next.
If the printer is listed, select the printer and click Next.
If the printer is not listed, click The printer that I want isn't listed.
Click Connect to this printer (or to browse for a printer, select this option and click Next).
a
Enter the path of the printer in the text box, and then click Next.
b
For example:\\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network.
The shared printer name is the name assigned during the server installation process.
5
Click Browse for a printer, and then click Next.
6
Select the printer, and then click Next.
If this is a new printer, you may be prompted to install a print driver.
If no system driver is available, you need to specify the path to available drivers.
7
Specify the following settings if you want, and then click Next.
If you want to verify installation, click Yes to print a test page.
• Click Yes to set this printer as the default printer.
• Click Yes to print a test page for verifying installation.
8
Click Finish.
When a test page prints successfully, installation is complete.
88
Printer Connection and Software Installation