• AdjustFusingUnit
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
•
The print quality changes depending on the setting values you select for this item.
Values:
Plain
Plain Thick
Light Card
Heavy Card
Envelope
Labels
• Adjust Density
Purpose:
To adjust density level.
Values:
*
0
-3 to +3
• Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Values:
Pitch Chart
Full Page Solid
Alignment Chart
• Clean Developer
Purpose:
To stir the developer in a drum cartridge.
172
Using the Operator Panel Menus
*
0
-3 to +3
*
0
-3 to +3
*
0
-3 to +3
*
0
-3 to +3
*
0
-3 to +3
*
0
-3 to +3
Prints a full halftone page. Also prints a page to check
the pitch. A total of two pages are printed.
1-Sided
Prints a chart of the full page solid on the paper.
2-Sided
Prints a chart of the full page solid on both sides of the
paper.
Prints a chart to check for proper alignment of the print
image on the paper.