Pdf Settings; Sided Print; Print Mode; A4 Wide - Fuji Xerox DocuPrint P355 d User Manual

• A4 Wide

Purpose:
To expand the printable area width 8 inch.
Values:
*
Off
On

PDF Settings

Use the PDF Settings menu to change printer settings that only affect the PDF jobs.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Quantity
Purpose:
To specify the number of copies to print.
Values:
*
1sets
1–999sets
• 2-Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
*
1-Sided
Long Edge Flip
Short Edge Flip

• Print Mode

Purpose:
To specify the print mode.
Value:
*
Normal
High Quality
High Speed
• Password
Purpose:
To specify the password to print the secure PDF.
Value:
Password
156
Using the Operator Panel Menus
Disables A4 Wide.
Enables A4 Wide.
Sets the value in increments of 1.
Prints on one side of a sheet of paper.
Prints on both sides of a sheet of paper to be bound by long edge.
Prints on both sides of a sheet of paper to be bound by short edge.
For documents with normal sized characters.
For documents with small characters or thin lines, or documents
printed using a dot-matrix printer.
Prints with the higher speed than the Normal mode, but the quality is
less.
Enter the password to print the secure PDF.