Printer Setup - Fuji Xerox DocuPrint P355 d User Manual

 Printer Setup
You can install your new printer on the network using the Driver CD Kit that shipped with your printer, or using
Microsoft Windows' Add Printer wizard. The following procedure uses the PCL 6 driver as an example.
Installing a Print Driver Using the Add Printer Wizard
1
Click Start → Devices and Printers (Start → Control Panel → Hardware and Sound → Printers for
Windows Vista and Windows Server 2008).
2
Click Add a printer to launch the Add Printer wizard.
3
Select Add a network, wireless or Bluetooth printer.
4
In the list of available printers, select the one you want to use, and then click Next.
NOTE:
• In the list of available printers, the WSD printer is displayed in the form of http://IP address/ws/.
• If no WSD printer is displayed in the list, enter the printer's IP address manually to create a WSD printer. To enter the
printer's IP address manually, follow the instructions below.
For Windows Server 2008 R2, to create a WSD printer, you must be a member of Administrators group.
1 Click The printer that I want isn't listed.
2 Select Add a printer using a TCP/IP address or hostname and click Next.
3 Select Web Services Device from Device type.
4 Enter the printer's IP address in Hostname or IP address and click Next.
• Before installing the driver using the Add Printer wizard on Windows Server 2008 R2 or Windows 7, perform one of the
following:
- Establish the Internet connection so that Windows Update can scan your computer.
- Add the print driver to your computer.
5
If prompted, install the print driver on your computer. If you are prompted for an administrator password or
confirmation, enter the password or provide confirmation.
6
Complete the additional steps in the wizard, and then click Finish.
7
Configure the option settings and print a test page to verify print installation.
Click Start → Devices and Printers (Start → Control Panel → Hardware and Sound → Printers for
a
Windows Vista and Windows Server 2008).
Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista
b
and Windows Server 2008).
On the Configuration tab, click Installable Options to configure the option settings, and then click Apply.
On the General tab, click Print Test Page. When a test page prints successfully, installation is complete.
c
147
Printing Basics