Fuji Xerox DocuPrint P355 d User Manual page 100

Configuring the Optional Wireless Printer Adapter
This section describes how to configure a wireless printer adapter through Easy Install Navi, operator panel and
CentreWare Internet Services.
You can select a method to configure a wireless printer adapter from the following:
Wizard Setup through
(Windows Only)
Non-Wizard Setup through
*1 WPS-PBC (Wi-Fi
required for wireless configuration, by pressing the button provided on the access point via wireless routers, and
then performing WPS-PBC setting on the operator panel. This setting is available only when the access point
supports WPS.
*2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register
devices required for wireless configuration, by entering PIN assignments in the printer and computer. This setting,
performed through access point, is available only when the access points of your wireless router supports WPS.
IMPORTANT:
• Ensure that the Ethernet cable has been disconnected from the printer before you configure the wireless settings other than
through Ethernet cable and CentreWare Internet Services.
NOTE:
• Before you configure the wireless settings on the operator panel, you need to set up the wireless network settings on your
computer. For details, refer to the manuals provided with the wireless LAN access point or if your computer provides a
wireless adapter tool, configure the wireless settings using that tool.
• If the Panel Lock Set is set to Enable, you need to enter the four digit password to enter the Admin Menu menu.
100
Printer Connection and Software Installation
USB cable (recommended)
*1
WPS-PBC
*2
WPS-PIN
Operator Panel
Ethernet Cable
CentreWare Internet Services
*1
WPS-PBC
*2
WPS-PIN
Operator Panel
CentreWare Internet Services
®
Protected Setup-Push Button Configuration) is a method to authenticate and register devices