Damage On The Leading Edge Of Paper; The Top And Side Margins Are Incorrect - Fuji Xerox DocuPrint P355 d User Manual

 Damage on the Leading Edge of Paper
Problem
The output is damaged on its
leading edge.
 The Top and Side Margins Are Incorrect
Problem
The top and side margins are
incorrect.
Action
When using the bypass tray, reverse the paper and then try again.
If the problem persists, change the paper with another one and then try again.
When using the standard 250 sheet tray or optional 250 sheet feeder, change the
paper and then try again.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Change the paper with another one and then try again.
If the problem persists, use the standard 250 sheet tray or optional 250 sheet feeder
in place of the bypass tray.
Use the standard 250 sheet tray or optional 250 sheet feeder in place of the bypass
tray.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Action
Ensure that the margins are set correctly on the application being used.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Troubleshooting
219