Fuji Xerox DocuPrint P355 d User Manual page 202

Regi Jam (Exit Sensor On JAM)
Problem
Regi jam (Exit Sensor On JAM)
occurs.
Exit Jam (Exit Sensor Off JAM)
Problem
Exit jam (Exit Sensor Off JAM)
occurs.
202
Troubleshooting
Action
Ensure that the drum cartridge is installed correctly.
If the problem persists, replace the drum cartridge if you have a spare cartridge as
instructed in "Replacing the Drum Cartridge" on page
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 237
If the problem persists, ensure that the fusing unit is installed correctly.
Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
Unit, Transfer Unit and Retard Roll" on page
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit, Transfer Unit and Retard Roll" on page 240
If the problem persists, ensure that the transfer unit is installed correctly.
Ensure that the transfer unit is installed correctly.
If the problem persists, replace the transfer unit and the retard roll as instructed in
"Replacing the Fusing Unit, Transfer Unit and Retard Roll" on page
Replace the transfer unit and the retard roll.
See also:
• "Replacing the Fusing Unit, Transfer Unit and Retard Roll" on page 240
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Action
Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
Unit, Transfer Unit and Retard Roll" on page
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit, Transfer Unit and Retard Roll" on page 240
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
237.
"Replacing the Fusing
240.
240.
"Replacing the Fusing
240.