Bypass Tray - Fuji Xerox DocuPrint P355 d User Manual

Bypass Tray

Purpose:
To specify the paper loaded in the bypass tray.
Values:
Paper Size
mm series
inch series
Paper Type
MPT mode
*
Driver Size
A4 - 210x297
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
Monarch Env.
DL Env- 110x220
C5 Env- 162x229
#10Env- 4.1x9.5
New Custom Size Portrait(Y)
Landscape(X)
*
Driver Size
Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
A4 - 210x297
A5 - 148x210
B5 - 182x257
Monarch Env.
DL Env- 110x220
C5 Env- 162x229
#10Env- 4.1x9.5
New Custom Size Portrait(Y)
Landscape(X)
*
Plain
Plain Thick
Light Card
Heavy Card
Envelope
Labels
Letterhead
Hole Punched
Colored
Other Type
Panel Specified Configures the paper size and type on the operator panel.
*
DriverSpecified Configures the paper size and type on the print driver.
297 mm* Specifies the length of
the custom size paper.
127 - 355 mm
210 mm* Specifies the width of
the custom size paper.
77 - 215 mm
11.7"* Specifies the length of
the custom size paper.
5.0-14.0"
8.3"* Specifies the width of
the custom size paper.
3.0-8.5"
Using the Operator Panel Menus
177