Fuji Xerox DocuPrint P355 d User Manual page 17

Do not incline the product at more than 10 degree angle. Otherwise, it may fall over and cause
injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox supplies.
Otherwise, it may cause some defects.
Others
To keep this product in a good performance and condition, always use it in the following
environment:
• Temperature: 10 - 32 °C
• Humidity: 10 - 85%
When the product is left in a chilly room and the room is rapidly warmed up by heater, dew
condensation may form inside the product and cause a partial deletion on printing.
Right Left
10°
Front Back
10°
Right Left
10°
Front Back
10°
17
Safety Notes