Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
NOTE:
•
Values marked by an asterisk (*) are the factory default menu settings.
• F/W Version
Purpose:
To confirm the current F/W version.
• Adjust PaperType
Purpose:
To specify paper density settings.
Values:
Plain
• Adjust TransUnit
Purpose:
To specify the transfer unit voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
•
The print quality changes depending on the setting values you select for this item.
Values:
Plain
Plain Thick
Light Card
Heavy Card
Envelope
Labels
Lightweight
*
Heavyweight
*
0
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
Using the Operator Panel Menus
171