Configure Avaya Aura® Communication Manager - Avaya GXV3240 Application Notes

5. Configure Avaya Aura® Communication Manager
These Application Notes assume that basic Communication Manager administration has already
been performed, including the configuration needed to establish a SIP trunk to Session Manager.
Consult Reference [1] for further details if necessary.
All configuration in this section is administered using the System Access Terminal (SAT).
5.1. Configure Video Parameters
Enable IP Video on the signaling group for the SIP trunk between Communication Manager and
Session Manager. Enter the "change signaling-group" command. Set IP Video to y. By
default, Direct IP-IP Audio Connections is enabled for audio media shuffling.
MJH; Reviewed:
SPOC 4/15/2015
Solution & Interoperability Test Lab Application Notes
©2015 Avaya Inc. All Rights Reserved.
6 of 25
Grandstream_SM