Ip400 Phone 8/16/30 - Avaya IP Office 3.0 Installation Manual

IP400 Phone 8/16/30

Front View (30 Port version)
Notes
1. The IP400 Phone 8 variant is only equipped with the bottom left row of ports.
2. The IP400 Phone 16 variant is only equipped with the bottom row of ports.
•
Plain Ordinary Telephone (POT) Ports
These ports are used for connection to standard analog telephones, fax machines and modems.
Using standard structured wiring, these RJ45 ports can be extended to the required telephone
location. Converters can be used to provide BT New Plan sockets (431A/631A) if required. When
devices are equipped with line cords that terminate in RJ11 plugs, then RJ11/RJ45 adapters
should be used. All analog telephones must conform to the port specification (see Interfaces).
Rear View (all versions)
•
Expansion Port
Used to connect a Phone Expansion Module to the Expansion Ports of an IP Office platform.
• DC Power I/P Socket
Socket for the external 24V DC unregulated power supply (supplied with kit).
• DTE Port
A 25-way D-type socket. Used for connection to PC (diagnostics only).
All IP400 Office Phone variants are supplied with one blue Expansion Interconnect cable. See
Expansion Interconnect Cable and Port Pinouts.
Installation Manual
IP Office 3.0 40DHB0002UKCL Issue 12c (24th February 2005)
Expansion Modules
Page 25