Mib Loading; Hp Openview Network Node Manager 6.41 And Earlier - Avaya IP Office 3.0 Installation Manual

IP Office Installation

MIB Loading

In order to SNMP manage an IP Office system, that is browse its MIBs and fully interpret the traps it
sends out, the MIBs supported by IP Office must be loaded and compiled for use with your Network
Management System. The supported standard and proprietary MIBs together with the MIB files relied
upon for definitions are provided on the IP Office Admin CD off the directory snmp_mibs. Detailed below
are details of how to install the appropriate MIBs with a number of Network Management Systems.

HP OpenView Network Node Manager 6.41 and earlier:

MIBs are installed in Network Node Manager by selecting Options and Load/Unload MIBs: SNMP from
the menu and then using the Load... option and browsing for MIB files to load and compile. The following
MIBs must be installed in the order listed to fully SNMP manage an IP Office system:
MIB file
RFC2737-ENTITY-MIB
AVAYAGEN-MIB.mib
IPO-PROD-MIB.mib
IPO-MIB.mib
INET-ADDRESS-MIB.mib
RFC2213-INTEGRATED-SERVICES-MIB snmp_mibs\standard on OpenView install CD
DIFFSERV-DSCP-TC.mib
DIFFSERV-MIB-HPOV.mib
IPO-PHONES-MIB.mib
Installation Manual
IP Office 3.0
Source
snmp_mibs\standard on OpenView install CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
40DHB0002UKCL Issue 12c (24th February 2005)
Page 94