IP Office Installation
Space requirements
The following are applicable for all IP403, IP406 V2, IP412 and Expansion Modules. Check that the
planned location meets the following requirements.
•
Height : 71mm(2.8 inches) high.
Hence the total height of a system is the number of modules multiplied by 71mm (2.8
inches).
•
Width : 445mm (17.5 inches) wide.
•
Depth : 245mm (9.7 inches) deep.
Modules and units can be mounted in 19" racks (see Rack Mounting Assembly
•
Instructions).
When modules are free standing (ideally mounted one upon another), allow a
•
minimum clearance of 50mm (20 inches) either side for cable trunking.
Check there is suitable lighting for installation, system programming and future
•
maintenance.
Check that there is sufficient working space for installation and future maintenance.
•
Ensure that likely activities near the system will not cause any problems, e.g. access
•
to and maintenance of any other equipment in the area.
Installation Manual
IP Office 3.0
40DHB0002UKCL Issue 12c (24th February 2005)
Page 36