Ip400 Office System Components - Avaya IP Office Installation Manual

2.2 IP400 Office System Components

The following are the typical components of an IP Office IP400 system.
IP Office Installation
IP Office
System Overview: IP500 Office System Components
IP Office IP400 Control Unit
•
The control unit holds the main configuration and performs the routing
and switching for telephone calls and data traffic. Each control unit
includes LAN ports, slots for additional internal cards and in some
cases integral digital and analog phone ports. IP Office 5.0 supports
the following IP400 control units:
IP406 V2
•
Includes 8 integral digital extension (DS) ports, 2 analog phone
ports and an 8 port ethernet LAN switch. Can be expanded by the
addition of up to 6
IP412
•
Includes a 2 port ethernet switch. Can be expanded by the
addition of up to 12
Trunk Cards
•
Each IP400 control unit supports the addition of two IP400 trunk
cards.
Internal Cards
•
Additional cards can be added to the IP400 control units for features
such as modem ports and voice compression channels (used for
VoIP).
Embedded Voicemail Memory Card
•
The IP460 V2 supports IP Office embedded voicemail by the addition
of an Embedded Voicemail memory card.
IP400 External Expansion Modules
•
Additional extension and trunk ports can be added using a number of
external expansion modules. The number supported depends on the
control unit type and the module type.
Power Supplies
•
Each IP400 Office control unit and external expansion module is
supplied with an external power supply unit. Additional power supply
units may also be required for IP phones and some phone add-ons.
Power Cords
•
Depending on the locale, different power cords need to be ordered for
each control unit, external expansion module and any phones or
devices using external power supply units.
Cables
•
The IP Office is designed primarily for connection to a structured
cabling system using CAT3 UTP cabling. This approach allows
telephone and data traffic to share the same wiring infrastructure and
simplifies equipment moves.
IP400 Rack Mounting Kit
•
The IP400 control units and expansion modules are designed to be
stacked free-standing. However they can also be rack mounted using
an optional rack mounting kit for each unit and module.
Surge Protectors and Barrier Boxes
•
Where the installation includes extensions in other buildings additional
protective equipment is required. This equipment may also be
required in areas where the lightning risk is high.
Phones
•
IP Office systems support a variety of Avaya digital and IP phones
plus analog phones.
external expansion modules.
external expansion modules.
15-601042 Issue 20b (16 July 2009)
Page 15