Fcc Notification - Avaya IP Office 3.0 Installation Manual

FCC Notification

This equipment is registered with the ACTA (Administrative Council for Terminal Attachments) in
accordance with FCC Part 68 of its rules. In compliance with those rules, you are advised of the
following:
• Means of Connection
Connection of this equipment to the telephone network shall be through a standard network
interface jack. Connection to 1.544-MBps digital facilities must be through a USOC RJ48C.
Connection to the Analog Trunk facilities must be through a USOC RJ45S.
• Notification to the Telephone Companies
Before connecting this equipment, you or your equipment supplier must notify your local
telephone company's business office of the telephone number or numbers you will be using with
this equipment.
• The facility interface codes (FIC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1)
are 04DU9.BN, 04DU9.DN, 04DU9.IKN, 04DU9.ISN.
•
The facility interface code (FIC) for analog trunk connection (i.e IP400 Office Quad Analog
Trunk-LS) are OL13A, OL13B, OL13C, 02AC2, 02LA2, 02LB2, 02LC2, 02LR2, 02LS2.
• The facility interface code (FIC) for analog trunk connection (i.e. IP400 Office ATM16-LS/GS)
are OL13A, OL13B, OL13C, 02AC2, 02GS2, 02LA2, 02LB2, 02LC2, 02LR2, 02LF2.
• The Service Order Code (SOC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1) is
6.0Y.
•
The Service Order Code (SOC) for analog trunk connection (i.e. IP400 Office Quad Analog
Trunk-LS) is 9.0Y.
• Disconnection
You must also notify your local telephone company if and when this equipment is permanently
disconnected from the line or lines.
• Hearing Aid Compatibility
The custom telephone sets for this system are compatible with inductively coupled hearing aids
as prescribed by the FCC.
Ringer Equivalence Number (REN). The REN is used to determine the number of devices that may be
connected to the telephone line. Excessive RENs on the line may result in the devices not ringing in
response to an incoming call. In most, but not all, areas, the sum of the RENs should not exceed five. To
be certain of the number of devices that may be connected to the line, as determined by the total RENs,
contact the local telephone company to determine the maximum REN for the calling area.
Installation Manual
IP Office 3.0
Safety and Homologation Statements
40DHB0002UKCL Issue 12c (24th February 2005)
Page 67