Ip406 V2 Office - Front View - Avaya IP Office 3.0 Installation Manual

IP Office Installation

IP406 V2 Office - Front View

• DS Ports:
DS ports support Avaya 24xx, 44xx, 54xx and 64xx telephones. These ports support either A-
Law or mu-Law PCM encoding (default is country dependant and can be switched in software).
Using standard structured wiring, these RJ45 ports can be extended to the required telephone
location. When telephones are equipped with line cords that terminate in RJ11 plugs then,
although their wiring is compatible, it is advisable to use pin-to-pin RJ11/RJ45 adapters.
• Phone Ports:
These ports are used for connection to standard analog telephones, fax machines, modems and
only support 2-wire connection. Using standard structured wiring, these RJ45 ports can be
extended to the required telephone location. When telephones are equipped with line cords that
terminate in RJ11 plugs then, although their wiring is compatible, it is advisable to use pin-to-pin
RJ11/RJ45 adapters.
• LAN Ports:
These are LAN 10/100Mbps full duplex Layer 2 Ethernet ports and are used for PC and server
connectivity. They have auto-sensing capability (MDI/MDIX) and hence avoid the need for LAN
crossover cables when connecting to a network. They can also be used to connect to IP
telephones (Avaya 4600 IP series). LAN ports allow information relating to incoming and outgoing
telephone calls to be forwarded to PC based applications. They also provide access to the router
functionality/configuration of the Avaya IP406 V2 Office V2 for both data and Voice over IP (VoIP)
calls.
• Cables
IP406 V2 Office PRI 30 E1 & PRI 24 T1 are supplied with one red CAT5E cable. IP406 V2 Office
Analog 4 is supplied with four red CAT5E cables. IP406 V2 Office BRI 16 is supplied with eight
red CAT5E cables.
Installation Manual
IP Office 3.0 40DHB0002UKCL Issue 12c (24th February 2005)
Page 14