Ip400 Phone Module V2 - Avaya 4600 Series Installation Manual

I P400 Phone Module V2
1 6 0 B
The IP400 Phone V2 module (also known as the Phone V2 module) is used to add additional PHONE
ports to an IP Office system. PHONE ports are used for analog phones.
The Phone V2 module is available in 8, 16 and 30 port variants, referred to as the Phone 8, Phone 16
and Phone 30 respectively.
The Phone V2 module supersedes the original IP400 Phone module, now referred to as the Phone V1.
The module version is indicated by labels on both the base and the rear of the module. Key changes are:
•
The Phone V2 uses an earthed 3-pin 60W external power supply unit.
•
With IP Office 3.1, the message waiting indication (MWI) on each POT port can be configured for
None, On, 51V Stepped, 81V, Line Reversal A or Line Reversal B. On uses the default
determined by the system locale. POT ports on a Phone V2 module can additionally be
configured for 101V operation.
•
The ports do not include a ringing capacitor. Therefore for phones where this is a requirement,
connection should be via a Master socket containing ringing capacitors.
•
The DTE serial port on the rear of the module has been changed to a 9-pin D-type socket.
Feature Details
Supported All IP Office control units except Small Office Edition.
on
Locales Supported in all IP Office locales.
Software IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.
Level
Included Power supply unit (see below) and Expansion Interconnect cable.
Power The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU
has an integral power cord for connection to the module's DC I/P socket. A locale
Supply
specific IEC60320 C13 power cord for the external PSU is required but is not supplied
with the module.
Mounting The module is designed as a free-standing module that can be stacked on or under
other IP Office modules. The module can be rack mounted in a 19" rack system using
the optional Rack Mounting Kit.
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)
Installation Manual
IP Office 3.2 15-601042 Issue 14b (13th November 2007)
System Components
Page 203