Printer And Pc Connection - Panasonic KX-TD308 Installation Manual

2.3.8 Printer and PC Connection

2.3.8 Printer and PC Connection
Serial Interface
(RS-232C) (9-pin)
A user-supplied printer or personal computer (PC) can be
connected to the system. These are used to print out or refer to the
SMDR call records and system programming data.
Connect the printer cable or the PC cable to the Serial Interface
(RS-232C) connector. The cable must be shielded and the
maximum length is 2 m (6.5 feet).
Arrange cables so that the printer will be connected to the system
as shown in the chart on the following page.
The pin configuration of Serial Interface (RS-232C) Connector is
as follows:
Pin
Signal name
no.
2 RXD Received Data
3 TXD Transmitted Data
4 DTR Data Terminal Ready
5 SG Signal Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
Printer or
Circuit type
EIA CCITT
BB
BA
CD 108.2
AB
CC
CA
CB
Installation
Computer
104
103
102
107
105
106
2-23