Caller Id Assignment - Panasonic KX-TD308 Installation Manual

406
Description
Selection
Default
Programming
Conditions
Feature References
4-100 System Programming
4.6 Outside Line Programming

Caller ID Assignment

Enables the Caller ID feature for the outside lines to which a Caller
ID Service is offered by a Central Office by contract.
• Outside line (CO) number: 1 through 3,
• Enable / Disable
All outside lines – Disable
1. Enter 406.
Display: 406 CALLER ID CO
2. Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside lines to one selection, press the
In this case, the display shows the contents programmed for outside line
1.
• The following programs are used to program Caller ID feature: [110]
"Caller ID Code Set" and [111] "Caller ID Name Set".
Section 3, Features
Caller ID
( =all outside lines)
key in step 3.