Printer And Pc Connection - Panasonic KX-TD816 Installation Manual

2.3 Connection

2.3.8 Printer and PC Connection

A user-supplied printer or personal computer (PC) can be connected to the system. These are
used to print out or refer to the Station Message Detail Recording (SMDR) call records and
system programming data.
Connect the printer cable or the PC cable to the Serial Interface (RS-232C) connector. The
cable must be shielded and the maximum length is 2 m.
Note
The KX-TD1232 is illustrated as the main unit.
Arrange cables so that the printer will be connected to the system as shown in the chart on the
following page.
The pin configuration of Serial Interface (RS-232C) Connector is as follows:
Pin
No.
1 FG
2 SD (TXD)
3 RD (RXD)
4 RS (RTS)
5 CS (CTS)
6 DR (DSR)
7 SG
8 CD (DCD)
20 ER (DTR)
64
Serial Interface
(RS-232C) (25-pin)
Signal Name
Frame Ground
Transmitted Data
Received Data
Request To Send
Clear To Send
Data Set Ready
Signal Ground
Data Carrier
Detect
Data Terminal
Ready
Printer or
Circuit Type
EIA CCITT
AA 101
BA 103
BB 104
CA 105
CB 106
CC 107
AB 102
CF 109
CD 108.2
Computer
General Installation