Serial Interface (Rs-232C) Parameters - Panasonic KX-TD308 Installation Manual

4.9 Resource Programming

Serial Interface (RS-232C) Parameters

Description
New line code: Select the code for your printer or personal computer. If your
Baud rate: A baud rate code indicates the data transmission speed from the
Word length: A word length code indicates how many bits compose a character.
Parity: A parity code indicates what type of parity is used to detect an error
Stop bit: A stop bit code indicates the end of a bit string which composes a
Selection
Default
Programming
Assigns the communication parameters for the Serial Interface (RS-
232C) interface.
printer or personal computer automatically feeds lines with a
carriage return, select "CR". If not, select "CR+LF".
system to the printer or personal computer.
in the string of bits composing a character. Make an appropriate
selection depending on the requirements of your printer or personal
computer.
character. Select an appropriate value depending on the
requirements of your printer or personal computer.
• New line code: CR+LF / CR
(CR=Carriage Return, LF=Line Feed)
• Baud rate (baud): 150 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200
• Word length (bits): 7 / 8
• Parity bit: None / Mark / Space / Even / Odd
• Stop bit length (bits): 1 / 2
New line code = CR+LF; Baud rate = 9600; Word length = 8;
Parity bit = Mark; Stop bit = 1
1. Enter 806.
Display: 806 RS232 PORT
2. Press NEXT to program new line code.
Display example: NL-Code:CR+LF
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press NEXT to program baud rate.
Display example: Baud Rate:9600
6. Keep pressing SELECT until the desired selection is
displayed.
7. Press STORE.
System Programming
806
4-137