Extension Programming - Panasonic KX-TD308 Installation Manual

600
Description
Selection
Default
Programming
Conditions
Feature References
4-120 System Programming
4.8

Extension Programming

EXtra Device Port
EXtra Device Port (XDP) allows a standard telephone to be
connected to the same jack as a digital proprietary telephone
(DPT). This program assigns which jacks are XDP. The standard
telephone and DPT of the programmed jack work as independent
extensions.
• Jack number: 1 through 8,
• Disable / Enable
All jacks – Disable
1. Enter 600.
Display: 600 XDP PORT
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
Display example: #1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for Jack 1.
• Immediately after changing your assignment, the changed setting may
not work for a maximum of eight seconds.
Section 3, Features
EXtra Device Port (XDP)
( =all jacks)
key in step 3. In this