Using The Overlay - Panasonic KX-TD308 Installation Manual

4.1.1 Using Proprietary Telephones
Type 5
SKP+ SEL
Soft 1 Soft 2
Note

Using the Overlay

4-4 System Programming
Press SHIFT
to alternate
NEXT
Soft 3 SHIFT
You can use either the soft buttons or the overlay buttons. (For
overlay buttons, refer to "Using the Overlay" below.)
Throughout programming you will see instructions such as "Press
PREV". If you use soft buttons, this means press SHIFT, release
SHIFT and then press Soft 3. The (PREV) function is performed.
If you use soft buttons and if programming instructions tell you to press
the following buttons, you may press soft buttons shown below.
Instructions
SELECT
CLEAR
A programming overlay is packed with the telephone at the factory.
This overlay should be used at all times while in programming
mode since the functions of the telephone keys change while in
programming mode as follows: (The original functions are in
parentheses.)
During Normal Operation
(PAUSE)
(SP-PHONE)
(REDIAL)
(AUTO ANSWER / MUTE)
(FLASH or FLASH/RCL)
(TRANSFER)
(FWD/DND)
(CONF)
(INTERCOM)
(AUTO DIAL / STORE)
(HOLD)
SKP- CLR
Soft 1
Soft button
SEL+,SEL-,or SEL
CLR
During Programming
PAUSE / PROGRAM
PREV (PREVIOUS)
SELECT
CLEAR
SECRET
PREV
Soft 3 SHIFT
Soft 2
NEXT
FLASH
– /
STORE
END