Station Hunting Type - Panasonic KX-TD308 Installation Manual

4.3 System Programming
Description
Selection
Default
Programming

Station Hunting Type

Used to enable or disable hunting and set the Station Hunting type
for each extension group. There are six Station Hunting types
available: Circular, Terminating, Voice Mail (VM), Automated
Attendant (AA), Ring Group and Uniform Call Distribution (UCD).
If circular hunting is assigned for a group, all of the extensions in
the group are searched until an idle one is found. If terminating
hunting is assigned, searching stops at the extension which has the
largest jack number in the group. If VM hunting is assigned, all of
the VM ports of an extension group are searched until an idle one is
found which allows Voice Mail Service. If AA hunting is assigned,
all of the AA ports of an extension group are searched until an idle
one is found which allows AA Service. If Ring Group is assigned,
all of the extensions in the ring group ring simultaneously. If UCD
is assigned, group members are hunted in a circular way.
• Extension group number: 1 through 8,
• Disable (no hunting) / Terminate (terminating) / Circular / VM
(voice mail) / AA (automated attendant) / RING / UCD
All extension groups – Disable
1. Enter 106.
Display: 106 STATION HUNT
2. Press NEXT.
Display: EXT GRP NO?
3. Enter an extension group number.
To enter extension group number 1, you can also press NEXT.
Display example: Group1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another extension group, press NEXT or PREV,
or SELECT and the desired extension group number.
7. Repeat steps 4 through 6.
8. Press END.
( =all extension
groups)
System Programming
106
4-39