4.7
COS Programming
Description
Selection
Default
Programming
Conditions
Feature References
Executive Busy Override
Determines which Classes of Services (COS) are allowed to
perform Executive Busy Override – Extension / Outside Line.
Executive Busy Override allows the user to interrupt an established
call.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1.
Enter 505.
Display: 505 EXEC BSY OR
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features
Executive Busy Override – Extension
Executive Busy Override – Outside Line
( =all COS)
key in step 3. In this
System Programming
505
4-115