Panasonic KX-TD308 Installation Manual page 289

113
Conditions
Feature References
4-46 System Programming
4.3
VM Status DTMF Set
3. Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
4. Press STORE.
5. To program another selection, keep pressing NEXT or PREV
until the desired selection is displayed.
6. Repeat steps 3 through 5.
7. Press END.
• A DTMF signal number can have a maximum of three digits, consisting
of 0 through 9, , # and PAUSE.
• The DTMF signals are sent to the extensions in the extension group that
is assigned as "VM" or "AA" in program [106] "Station Hunting
Type".
Section 3, Features
Voice Mail Integration
System Programming
(contd.)