Panasonic KX-TD308 Installation Manual page 362

4.7 COS Programming
Off-Hook Call Announcement (OHCA)
Description
Selection
Default
Programming
Conditions
Feature References
Enables or disables to perform the Off-Hook Call Announcement
(OHCA) on a Class of Service (COS) basis.
• COS number: 1 through 8,
• Enable / Disable
All COS – Enable
1. Enter 509.
Display: 509 OHCA
2. Press NEXT.
Display: COS NO?
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features
Off-hook Call Announcement (OHCA)
Whisper OHCA
( =all COS)
key in step 3. In this
System Programming
509
4-119