Ars Leading Digit Entry For Plans 1 Through 8 - Panasonic KX-TD308 Installation Manual

4.5 TRS / ARS Programming

ARS Leading Digit Entry for Plans 1 through 8

Description
Selection
Default
Programming
By entering numbers into each leading digit plan (programs below)
you are starting the process to determine which outside line will be
used to route the call.
Program: [314] [315] [316] [317] [318] [319] [320] [321]
Plan: 1 2
These eight plans are used to analyze the number which the user
dials and decide the route plan for the call. If the user-dialed
number is registered in Plan 1, then Routing Plan 1 is selected for
the call. Automatic Route Selection (ARS) Leading Digit Entry for
Plans 1 through 8 match ARS Routing Plans 1 through 8 (programs
[322] through [329]) respectively.
• Location number: 01 through 50
• Leading digit number: 10 digits (max.)
All locations – Not stored
1. Enter a program address (314 through 321).
Display example: 314 ARS LEAD D-1
2. Press NEXT.
Display: Location NO?
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:Not Stored
4. Enter a leading digit number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
314-321
3 4 5 6
System Programming
7 8
4-85