Printer And Pc Connection - Panasonic KX-TD308 Installation Manual

2.3.9 Printer and PC Connection

Serial Interface
(RS-232C) (g-pin)
A user-supplied printer or personal computer (PC) can be
connected to the system. Thse are used to print out or refer to the
SMDR call records and system programming data.
Connect the printer cable or the PC cable to the Serial Interface
(RS-232C) connector. The cable must be shielded and the
maximum length is 2 m (6.5 feet).
Arrange cables so that the printer will be connected to the system
as shown in the chart on the following page.
The pin configuration of Serial Interface (RS-232C) Connector is
as follows:
Signal name
2
RXD Received Data
3
TXD Transmitted Data
4 DTR Data Terminal Ready
Printer or
104
B B
BA 103
CD 108.2
CA
CB
Installation
Computer
2-21