Fostex VM200 User Manual page 78

EQ
The selected
EQ EDIT function page.
Press the
[EQ ON]
4.
The
[EQ ON]
selected channel.
The EQ On/Off indicator in the lower-right corner of the display
shows "On" to indicate that the EQ is turned on for the specified
channel.
Note: Be aware that the EQ may not turn on for certain channels
if the EQ Enable parameter setting is incorrect. The EQ Enable
parameter appears on the CURRENT SCENE STATUS function page. See
"EQ Enabling Channels" on page 80 for more information.
Use the rotary controls (Gain, Freq, and Q) to adjust the Fre-
5.
quency, Gain, and Q parameters.
The display shows a graphic frequency response curve.
You can watch a bell-shaped curve swell as you increase the gain,
or drop below the mid-line when you reduce the gain.For exam-
ple, watch the response curve swell as you raise the EQ/HI-MID
Gain, as illustrated in figures A and B below.
A
B
78
key lights up and the VM200 displays the
[EQ EDIT]
key in the Selected EQ section to turn it on.
key lights up, and the VM200 turns on the EQ for the
the response curve swells when Gain is raised
VM200 User's Guide