Use the
3.
send to the ADAT OUT.
Selected
indicators highlight (darken).
In the example above, channels 1–8 are sent directly to the corre-
sponding ADAT channels.
Press the
4.
The VM200 displays the CHANNEL EDIT function page.
Note: The Rec Buss also sends the left signal to channels 1, 3, 5 and
7, and the right signal to channels 2, 4, 6 and 8 so that you can route
them to ADAT OUT 1–8 directly. This configuration enables you to send
two mixes to two different external recorders at the same time.
VM200 User's Guide
keys to turn on the channels you wish to
[EQ EDIT]
keys light up. On the display, the "DIRECT"
[EQ EDIT]
[CHANNEL/METER]
Assigning Channels to ADAT DIRECT SENDs
key.
167