Fostex VM200 User Manual page 182

VM200 & MIDI
Viewing the Preset Program Change Assign Table
The Preset Program Change Assign Table appears on the 3:PGM TABLE2
function page.
Follow these steps to view the Preset assignments:
Press the
[MIDI]
1.
The VM200 displays the 3:PGM TABLE2 function page.
Select a Program Change number.
2.
Rotate the EQ/LO GAIN rotary control to select a number from
001 through 128.
As you turn the control, the PGM CHG No. parameter changes,
and the Assign Table scrolls to reflect the change.
The Scene number assigned to the selected Program Change
number will appear next to it in the Assign Table.
Program Change Assign Table Notes
The "Scene Memory to Program Change Assign Table" appears on
page 210.
To reset the assignments to their initial settings, press the
key six times or until it displays the 6:INITIALIZE function page. Turn
the EQ/LO GAIN rotary control to set the INIT ITEM parameter to
"PGM TBL," and press the
"Initializing the VM200" on page 197.
You can store the Program Change Assign Table to an external MIDI
device, such as a MIDI data filer, using MIDI Bulk Dump. (See "Bulk
Dump" on page 179 for more information.)
If a scene is assigned to two or more program changes, the lowest pro-
gram change is transmitted when the scene is recalled.
182
key three times.
key. For more information, see
[ENTER]
[SYSTEM]
VM200 User's Guide