Fostex VM200 User Manual page 146

Effects
REVERB-FLANGE (49)
Parameter
REV TIME
0.1–30.0 [s] (0.1 step)
PRE DLY
0–160 [ms] (1 step)
HI RATIO
0.1–1.0 (0.1 step)
PRESENCE
-10–0–+10 (1 step)
DENSITY
0–10, AUTO
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
FLA RATE
0.01–2.00 [Hz] (0.01 step)
FLA FB
0–100 [%] (1 step)
FLA BAL
0–100 [%] (1 step)
1. Brightness increases with a positive setting, and decreases with a negative setting.
2. With AUTO, the optimum value for the REV TIME setting will be used.
146
Value
Length of the reverberation.
Delay time from the early reflections until the
reverb.
Length of the high frequency reverberation,
expressed as a ratio relative to REV.TIME.
1
Brightness in the high range of the reverb.
2
Density of the reverb.
Cut-off frequency of the low pass filter.
Modulation speed. (0.01 step when ENTER is
pressed.)
Feedback amount.
Level of flange sound.
Description
VM200 User's Guide