Fostex VM200 User Manual page 144

Effects
Delay->Reverb-type Effects (42–45)
Parameter
DELAY TIME 1–500 [ms] (1 step)
DELAY FB
0–100 [%] (1 step)
DELAY BAL
0–100 [%] (1 step)
REV TIME
0.1–30.0 [s] (0.1 step)
PRE DLY
0–160 [ms] (1 step)
DENSITY
0–10, AUTO
DIFFUSION
0–100 [%] (1 step)
LO RATIO
0.1–2.0 (0.1 step)
HI RATIO
0.1–1.0 (0.1 step)
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
PRESENCE
-10–0–+10 (1 step)
1. With AUTO, the optimum value for the REV TIME setting will be used.
2. Brightness increases with a positive setting, and decreases with a negative setting.
CHORUS-REVERB (46)
Parameter
CHO DEPTH 0–100 [%] (1 step)
REV TIME
0.1–30.0 [s] (0.1 step)
PRE DLY
0–160 [ms] (1 step)
HI RATIO
0.1–1.0 (0.1 step)
PRESENCE
-10–0–+10 (1 step)
DENSITY
0–10, AUTO
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
REV BAL
0–100 [%] (1 step)
1. Brightness increases with a positive setting, and decreases with a negative setting.
2. With AUTO, the optimum value for the REV TIME setting will be used.
144
Value
Delay time.
Amount of delay feedback.
Delay sound level.
Length of the reverberation.
Delay time from the early reflections until the
reverb.
1
Density of the reverb.
Left/right spread of the reverb effects.
Length of the low frequency reverberation,
expressed as a ratio relative to the REV.TIME.
Length of the high frequency reverberation,
expressed as a ratio relative to REV.TIME.
Cut-off frequency of the low pass filter.
2
Brightness in the high range of the reverb.
Value
Modulation depth.
Length of the reverberation.
Delay time from the early reflections until the
reverb.
Length of the high frequency reverberation,
expressed as a ratio relative to REV.TIME.
1
Brightness in the high range of the reverb.
2
Density of the reverb.
Cut-off frequency of the low pass filter.
Level of reverb sound.
Description
Description
VM200 User's Guide