Fostex VM200 User Manual

<Deleting a user EQ program>
1. Press the [RECALL] key and [STORE] key in the EQ Library section simultaneously.
The VM200 displays the EQ LIBRARY: CLEAR function page.
2. Use the Data wheel or the [ /-1] or [+1/
then press the [ENTER] key.
The following warning message appears, asking you if you wish to continue.
If you wish to delete the selected program, press the ENTER key. If you wish to cancel the
operation, press the [EXIT] key.
The VM200 deletes the selected Library data and returns to Channel Edit mode.
<Deleting a user scene>
1. Press the [RECALL] key and [STORE] key in the Scene Memory section simultaneously.
The VM200 displays the SCENE MEMORY: CLEAR function page.
2. Use the Data wheel or the [ /-1] or [+1/
name, then press the [ENTER] key.
The following warning message appears, asking you if you wish to continue.
If you wish to delete the selected program, press the ENTER key. If you wish to cancel the
operation, press the [EXIT] key.
The VM200 deletes the selected scene data and returns to Channel Edit mode.
<A scene recalled after initializing>
With the previous version, when you initialize the VM200 settings by selecting "ALL" for the
INITIALIZE ITEM parameter on the SETUP: SYSTEM 6: INITIALIZE function page, the current scene
display is not refreshed. With the new version, the current scene will be also initialized and preset
scene "P0: Init Mix" will be recalled.
FOSTEX CORPORATION
3-2-35 Musashino, Akishima-shi, Tokyo 196-0021, Japan
FOSTEX CORPORATION OF AMERICA
15431, Blackburn Ave., Norwalk, CA 90650, U. S. A.
] key to select the desired EQ program number and name,
] key to select the desired scene program number and
PRINTED IN JAPAN JUNE 1999 8288 671 000 FX.
C
Model VM200
User's Guide Addendum
(V1.01 to V1.02)
The VM200 software has been updated from V1.01 to V1.02 and some default
settings have been changed. In addition, a few new functions have been added.
Please read this addendum along with the User's Guide.
8288 671 000