Fostex VM200 User Manual page 54

Getting Started
Adjusting the EQ
Press the channel 1
9.
The
[EQ EDIT]
Selected EQ section lights up green.
If the
[EQ ON]
The following EQ EDIT function page appears.
Use the EQ Gain, Freq, and Q rotary controls to adjust the
10.
channel 1 EQ.
Each trio of rotary controls adjusts the EQ in a separate fre-
quency band. Use all 12 rotary controls to adjust the channel 1
EQ in each of the four bands.
For example, watch the response curve swell as you raise the
EQ/HI-MID Gain, as illustrated in figures A and B below.
A
B
54
key.
[EQ EDIT]
key lights up orange, and the
key is not lit, press the key to turn it on.
the response curve swells when Gain is raised
key in the
[EQ ON]
VM200 User's Guide