Fostex VM200 User Manual page 103

When you're ready, press the
7.
wish to solo.
The selected
Note: Solo channels take priority over the sources you select using the
Mon Sel parameter.
Note: When channels are configured as stereo pairs ("Pairing Channels"
on page 68), their [SOLO] keys are linked.
Note: If Solo Mode is set to M-SOLO, you must raise the fader for the
soloed channel and the Master fader or you will not hear any output.
VM200 User's Guide
[SOLO]
keys light up.
[SOLO]
key for the channel(s) you
Soloing
103