Fostex VM200 User Manual page 142

Effects
Parameter
HI RATIO
0.1–1.0 (0.1 step)
CHORUS (37)
Parameter
DEPTH
0–100 [%] (1 step)
PRESENCE
-10–0–+10 (1 step)
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
1. Brightness increases with a positive setting, and decreases with a negative setting.
3D_CHORUS (38)
Parameter
DEPTH
0–100 [%] (1 step)
PRESENCE
-10–0–+10 (1 step)
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
1. Brightness increases with a positive setting, and decreases with a negative setting.
FLANGE (39)
Parameter
RATE
0.01–2.00 [Hz] (0.01 step)
DEPTH
0–100 [%] (1 step)
MOD DLY
0.0–30.0 [ms] (0.1 step)
FLANGE FB
0–100 [%] (1 step)
FLA1/2GAIN
0–100 [%] (1 step)
L10.00–0.0–R10.0 (0.5
FLA1/2PAN
step)
PRESENCE
-10–0–+10 (1 step)
142
Value
High frequency amount of the feedback.
Value
Modulation depth
1
Brightness in the high range of the reverb.
Cut-off frequency of the low pass filter.
Value
Modulation depth.
1
Brightness in the high range of the reverb.
Cut-off frequency of the low pass filter.
Value
Modulation speed.
Modulation depth.
Delay time from the direct sound until the modu-
lated sound.
Feedback amount.
Gain of FLANGE 1 or 2.
Pan position of FLANGE 1 or 2.
1
Brightness in the high range of the reverberation.
Description
Description
Description
Description
VM200 User's Guide