Fostex VM200 User Manual page 143

Parameter
LPF
1. Brightness increases with a positive setting, and decreases with a negative setting.
MONO_PITCH (40)
Parameter
PITCH
ADJUST
PITCH DLY
PITCH FB
PITCH PAN
PITCH MODE 1, 2, 3, 4
1. Select "1" when response speed is priority. Select "2" for a typical setting. Select "3" or
DUAL_PITCH (41)
Parameter
PITCH1/2
ADJUST1/2
PIT1/2 DLY
PIT1/2 FB
PIT1/2 PAN
PIT1/2 MODE 1, 2, 3, 4
1. Select "1" when response speed is priority. Select "2" for a typical setting. Select "3" or
VM200 User's Guide
Value
1.00kHz–20.2kHz, THRU
(step: same as EQ)
Value
-24–0–+24 (1 step)
(+/-2 octave)
-100–0–+100 (1 step)
(+/- semitone)
0–340 [ms] (1 step)
0–100 [%] (1 step)
L10.0–0.0–R10.0 (0.5
step)
1
"4" for more clarity.
Value
-24–0–+24 (1 step)
(+/-2 octave)
-100–0–+100 (1 step)
(+/- semitone)
0–340 [ms] (1 step)
0–100 [%] (1 step)
L10.0–0.0–R10.0 (0.5
step)
1
"4" for more clarity.
Description
Cut-off frequency of the low pass filter.
Description
Amount of pitch shift.
Fine adjustment to the pitch shift.
Delay time of the pitch shift.
Feedback amount.
Pan position of the pitch shift.
Selects the size of the buffer for pitch shift.
Description
Amount of pitch shift for PITCH SHIFT 1 or 2.
Fine adjustment to the pitch shift for PITCH
SHIFT 1 or 2.
Delay time of the pitch shift for PITCH SHIFT 1 or
2.
Feedback amount for PITCH SHIFT 1 or 2.
Pan position of PITCH SHIFT 1 or 2.
Selects the size of the buffer for PITCH SHIFT 1
or 2.
Effects Parameters
143