Fostex VM200 User Manual page 141

Parameter
HPF
PAN1
PAN2
LPF
1. If you adjust DELAY TIME, NOTE will be automatically changed.
2. If you adjust TEMPO, DELAY TIME will be automatically changed.
3. If you adjust NOTE, DELAY TIME will be automatically changed.
DUAL_DELAY (35)
Parameter
DLY TIME1/2
TEMPO
DLY1/2NOTE
DLY FB1/2
DLY1/2HI-R.
DLY1/2PAN
1. If you change DELAY TIME, NOTE will be automatically changed.
2. If you change TEMPO, DELAY TIME will be automatically changed. Two TEMPO
3. If you change DELAY TIME or TEMPO, the closest note value will be selected.
3CH_DELAY (36)
Parameter
DLY TIME
1/2/3
DLY1/2/3
GAIN
DLY1/2/3
PAN
FB DLY
TIME
DELAY FB
VM200 User's Guide
Value
THRU, Same as EQ
value [Hz]
L10.0–0.0–R100 (0.5 step) Pan position of the first delay.
L10.0–0.0–R100 (0.5 step) Pan position of the second delay.
Same as EQ value [Hz],
THRU
Value
0.0–680.0 [ms] (0.1 step)
30–250 [bps] (1 step)
0–100 [%] (1 step)
0.1–1.0 (0.1 step)
L10.0–0.0–R10.0 (0.5 step) Pan position of the DELAY 1 or 2.
parameter rotary controls operate in sync.
Value
0.1–1360.0 [ms] (0.1 step)
0–100 [%] (1 step)
L10.0–0.0–R10.0 (0.5 step) Delay 1/2/3 pan position.
0.1–1360.0 [ms] (0.1 step)
0–100 [%] (1 step)
Description
Cut-off frequency of the high pass filter.
Cut-off frequency of the low pass filter.
Description
Delay time of DELAY 1 or 2.
Tempo value used to calculate DLY TIME1, DLY
TIME2, NOTE1, and NOTE2.
Note value used to calculate DLY TIME1 or 2.
Amount of DELAY1 or 2 feedback.
High frequency amount of the DELAY 1 or 2 feed-
back.
Description
Delay time. (0.1 step when ENTER is pressed.)
Delay 1/2/3 level.
Delay time of feedback
Amount of delay feedback.
Effects Parameters
1
2
3
141