Fostex VM200 User Manual page 140

Effects
Parameter
DENSITY
0–10 (1 step)
PRESENCE
-10–0–+10 (1 step)
1.00kHz–20.2kHz, THRU
LPF
(step: same as EQ)
1. 0: dead, 10: live
2. Brightness increases with a positive setting, and decreases with a negative setting.
MONO_DELAY (33)
Parameter
DELAY TIME 0.1–1360.0 [ms] (0.1 step)
TEMPO
30–250 [bps] (1 step)
NOTE
DELAY FB
0–100 [%] (1 step)
LO RATIO
0.1–1.0 (0.1 step)
HI RATIO
0.1–1.0 (0.1 step)
THRU, Same as EQ
HPF
value [Hz]
Same as EQ value [Hz],
LPF
THRU
1. If you adjust DELAY TIME, NOTE will be automatically changed.
2. If you adjust TEMPO, DELAY TIME will be automatically changed.
3. If you adjust NOTE, DELAY TIME will be automatically changed.
PAN_DELAY (34)
Parameter
DELAY TIME 0.1–1360.0 [ms] (0.1 step)
TEMPO
30–250 [bps] (1 step)
NOTE
DELAY FB
0–100 [%] (1 step)
LO RATIO
0.1–1.0 (0.1 step)
HI RATIO
0.1–1.0 (0.1 step)
140
Value
Density of the reverb.
2
Brightness in the high range of the reverb.
Cut-off frequency of the low pass filter.
Value
Delay time.
Tempo value used to calculate DELAY TIME and
2
NOTE.
Note value used to calculate DELAY TIME.
Amount of delay feedback.
Low frequency amount of the feedback.
High frequency amount of the feedback.
Cut-off frequency of the high pass filter.
Cut-off frequency of the low pass filter.
Value
Delay time.
Tempo value used to calculate DELAY TIME and
2
NOTE.
Note value used to calculate DELAY TIME.
Amount of delay feedback.
Low frequency amount of the feedback.
High frequency amount of the feedback.
Description
Description
1
Description
1
3
3
VM200 User's Guide