Fostex VM200 User Manual page 177

Program Change Messages
You can send a Program Change message to the VM200 to recall a
scene from the VM200's Scene Memory. (For more information, see
"Using Program Change Messages to Recall Scenes" on page 180.)
Inversely, by recalling a scene on the VM200, you can transmit Pro-
gram Change messages to connected MIDI devices or instruments.
Program Change TX
The Program Change TX parameter determines whether the VM200
will transmit Program Change messages when you recall a scene from
Scene Memory.
Turn the Program Change TX parameter on if you want to change pro-
grams on a connected synthesizer when you change scenes on the
VM200.
The default setting is "On."
Program Change RX
The Program Change RX parameter determines whether the VM200
will recall a scene from Scene Memory when the VM200 receives a
Program Change message.
Turn the Program Change RX parameter on if you want to change
scenes on the VM200 from a connected sequencer.
The default setting is "On."
Program Change Table
The Program Change Table assigns program change numbers to
scenes in Scene Memory.
These assignments enable you to send MIDI messages from an exter-
nal MIDI device to recall scenes on the VM200.
For example, you could assign Program Change Number 07 to Scene
07. If you then send Program Change Number 07 from a connected
sequencer to the VM200, the VM200 will recall Scene 07.
The VM200 features two Program Change Tables (01 User Table, and
02 Preset Table). You can use the Program Change Table parameter
to select Table 01 or 02.
The default setting is "01."
For more information, refer to the "Program Change To Scene Memory
Assignment Tables" on page 210.
VM200 User's Guide
Program Change Messages
177